Retail
Our Price
The simple, convenient and lightweight way to create a durable terrain shell over stacked newspaper wads. Just dip pieces of Plaster Cloth in water and smooth over the wads. When dry you've created a hard shell surface for your landscaping. Roll is 8" wide x 15' long.
Price: $8.99
$6.99
This package includes four 1/2"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
Price: $6.49
$4.99
This package includes four 1"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
Price: $7.99
$5.99
This package includes four 2"x24" Risers that are used to elevate your track. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
Price: $9.99
$7.49
This package includes two 4"x24" Risers that are used for dramatic, steep relief on your layout, and to create lower areas for rivers and valleys. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
Price: $9.99
$7.49
This 2% Incline Set has eight sections that raise the elevation of your track from zero to four inches in 16 feet. Incline Sets allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $19.99
$14.99
This 4% Incline Set has four sections that raise the elevation of your track from zero to four inches in eight feet. Incline Sets allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $13.99
$10.99
This package of eight 2% Incline Starters raise elevations of your track 1/2 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $6.49
$4.99
This package of four 4% Incline Starters raise elevations of your track one inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $6.49
$4.99
This package includes four 3/4"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
Price: $7.49
$5.69
This package of six 3% Incline Starters raise elevations of your track 3/4 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $6.49
$4.99
This 3% Incline Set has six sections that raise the elevation of your track from zero to 4 1/2 inches in twelve feet. Incline Sets allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
Price: $19.99
$14.99
There are two Profile Boards (8" tall x 24" wide) and two Connectors in this package. Profile Boards are interlocking foam pieces with a smooth side and a ribbed side and are used to create the perimeter of the layout and mountain profiles. Place the Boards end-to-end or stack them to any height using the included Connectors. Trim Profile Boards with the Hot Wire Foam Cutter (ST1435) or a Foam Knife (ST1433).
Price: $9.99
$7.49
1/4" Foam Sheets work great for creating tunnels with curves. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $3.99
$3.19
1/2" Foam Sheets work great for forming tunnel walls, ceilings or overpass supports. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $4.49
$3.39
1" Foam Sheets work great for elevated areas and for supports. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $5.99
$4.49
2" Foam Sheets are great for creating mountains and terrain contours. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $12.99
$9.99
3" Foam Sheets are great for making bridges and other structures. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $15.99
$11.99
Use 4" Foam Sheets for craft projects or placing a building on a hillside. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Price: $18.99
$14.49
Foam Pencils have a special lead designed to draw on foam without causing damage. The colors will not bleed through paint or other coverings. Each package contains two red and two black pencils.
Price: $4.99
$3.99
Use Foam Nails to temporarily pin track, foam or other products to your layout.
Price: $5.99
$4.49
The Foam Knife comes with a 2" replaceable blade that is ideal for cutting thick pieces of foam.
Price: $7.99
$5.99
Four replacement blades for the Woodland Scenics Foam Knife. 2" long.
Price: $6.49
$4.99
The Hot Wire Foam Cutter has adjustable collars allowing for clean, accurate cuts in foam. Woodland Scenics recommends using only on SubTerrain white foam which emits no toxic fumes. Use only special nichrome replacement wire. The throat of the Hot Wire Foam Cutter is 4.5" wide by 5.5" deep. Input: 120VAC and Output: 9VAC, 1300mA
Price: $39.99
$29.99
Special nichrome wire retains an even temperature needed to cut our foam products. Use only with our Hot Wire Foam Cutter. 4 ft.
Price: $2.49
$1.99
The Bow attachment adds versatility to the Hot Wire Foam Cutter. Attach the Guide for precise angle cuts (handle not included).
Price: $7.99
$5.99
The Woodland Scenics® Hot Knife is for hobbyists, crafters, artists and professional contractors. It will cut and shape Woodland Scenics SubTerrain foam products, wax and more.
Price: $69.95
$52.99
This specially formulated glue is high-tack and effective on most materials, especially foam. Use as a contact cement whenever bonding two large surfaces. 12 oz.
Price: $11.99
$8.99
The Glue Gun, with Low Temp Foam Glue Sticks, operates at a temperature that will not damage foam and bonds instantly.
Price: $16.99
$12.99
10 Sticks, 10" long
Price: $6.49
$4.99
A non-shrinking, lightweight filling material that has the same characteristics as foam. Fill cracks and gaps on foam, then sand when dry. 16 oz.
Price: $8.99
$6.99
This flexible, non-cracking modeling paste can be used to create a hard surface, as a filler or primer on Styrofoam®. Also use as a road base or sealer under water. Excellent for modeling heavy snow drifts. Apply Flex Paste to create drifts. Sprinkle Soft Flake Snow on top.
Price: $19.99
$14.99